Casadei K60 PM automatic edge bander

Description

Casadei K60 PM automatic edge bander

Technical data of the automatic edge banding machine Casadei K60 PM

• Feed speed m / min 11
• Panel thickness mm min 8 – max 60
• Maximum reel diameter 800 mm
• Space for 600 mm panels
• Minimum panel length (edge ​​in the edge) 120 mm
• Slat edge thickness (automatic insertion) on max 60 mm panels
• Minimum panel width 110 mm
• 500 mm panel supporting roller conveyor opening
• Operating pneumatic pressure bar 6.5
• Pneumatic system air consumption in working NL / min 300
• Suction connection ports 1 x Ø 120 + 2 x Ø 80
• Thickness of edge in reel on panels with a maximum height of 60 mm mm 3
• Minimum air flow speed at the suction inlets m / sec 20
• Air consumption of the intake system m3 / min 1550
• Edge thickness in batten (manual insertion) on max 60 mm panels

 

Rectifier group (PM version)

• Max removal with panel height 60 mm mm 2
• HF motor power kW 2 x 1.1
• Diamond drill tool diameter mm Ø 60 x H64
• Tool rotation speed g / min 12,000

 

Casadei K60 automatic edge gluing unit

• Resistance power (Nr.7 cartridges) W 3.050
• Heating time from temp. environment min 12 – 14
• Heating time from stand by min 4 – 5
• Bowl capacity 2 kg

 

Casadei K60 automatic edge trimming unit

• Motor power HF kW 0,27
• Size of the trimming blades mm 2 x Ø 100, z 20 – 2 x Ø 80, 20 °, z12
• Blade rotation speed g / min 1.2000

 

Casadei K60 automatic edge trimming unit

• Motor power kW 2 x 0.5
• Tool rotation speed g / min 12,000
• Vertical copiers 2 wheels Ø 120
• Front copiers 2 skids
• Tool dimensions with Widia plates with combined profile 2 x Ø 75 x H20, z4
• Motor power HF kW 0,27
• Size of the trimming blades mm 2 x Ø 100, z 20 – 2 x Ø 80, 20 °, z12
• Blade rotation speed g / min 1.2000

 

Optional on request Casadei K60 automatic edge banding machine

• Kit slats up to 10 mm thick allows automatic loading of the edges into slats
  Complete with: slats stock with capacity up to 150 mm; motor for trimming 0.27 kW, additional pin roller; motorization 1st pressure roller.
• Anti-adhesive release liquid spray group
  prevents excess glue from sticking to the lower and upper surfaces of the panel
  The spray function is managed by the electronic control.
  Complete with 2 sprayers (lower and upper) and liquid tank.
• Infrared lamp for panel preheating after pre-milling.
  Indicated to optimize the gluing of the edge by heating the panels before the gluing phase. Recommended especially for areas with cold climate and for those storing panels in cold places
  No. 2 HF motors for trimming unit with increased power kW 0.73 – 200Hz – 12.000 g / min.